Re: Stepper motor works from prontoface, but not when printing
same problem with my printer as said by Tellblom, I am using Gen7 1.4 electronics board with A4988 stepper driver. I have build prusai3 with 5 Nema17 stepper motor
View ArticleStepper motor 6 pin locking female plug
Guys, My google skills are failing me today. And not a wiff on ebay except supplied with the motors. Does anyone know the name, spec or part numbers for the 6 pin female plugs on my Nema17 stepper...
View ArticleRe: Stepper motor 6 pin locking female plug
Found out what they are now. JST 6 way 2mm Available from places like farnell. Gordon
View ArticleClik here to view.
Re: Advice for a wear resistant extruder cable.
Wow! You are one of only a few people in the world who would have figured that out. I salute you! I struggled for a long time to find a solution to the extruder cable/connector problem. I think there...
View Articlestepper motor still vibrate after turning with ptonterface
HI everybody I have built a 3d printer using ramps 1.4 but i have a problem with my stepper motor, they still vibrate after moving with pronterface or the lcd panel . can you help me !! here is my...
View ArticleRe: Stepper motor 6 pin locking female plug
Oh no its not. They arrived in the post and are too large. So not the 2mm version. Gordon
View ArticleStepper Motors do not move
Hello everybody, I am looking for a bit of help. I know the subject come up often in this forum but I have not been able to find the answer in everything that has been proposed. Trouble is the...
View ArticleRe: Stepper Motors do not move
Are you certain that the right connections or jumpers are in place to configure the 8825s for 1/32 microstepping? If they are not, then you could be trying to move or accelerate the motors too fast.
View ArticleRe: Stepper Motors do not move
Hi, I believe so : the 4 jumpers are in place. If I had only 3, I would have the 1/16 micro step config. And I tried to change the "step/unit" with 80 instead of 160 too. Then I lowered feed rates and...
View ArticleRe: Stepper Motors do not move
Hi I am also stuck on a similar matter. I have built the Prusa i3Steel. I have the Ramps 1.4 shield with A4899 drivers. Jumpers in and double checked. I can get the steppers motors to move to home...
View ArticleRe: Stepper Motors do not move
Mine do not move at all... They moved with the test firmware of the megatronics 2.0. Still looking for the answer...
View ArticleRe: Stepper motor 6 pin locking female plug
Look out, JST do various ranges which look quite similar. If you PM me tomorrow during the day as a reminder I'll look them up on our database and might be able to help.
View ArticleRe: Stepper motor 6 pin locking female plug
I think ive foound them theyre the 1.5mm version not the 2mm. Ive got some on the way to try. Tried ordering them from farnell as theyre not that expensive but couldnt think of anything else i wanted...
View ArticleRe: Stepper motor 6 pin locking female plug
Hmm, I think they are JST PHR-6 which is indeed a 2mm pitch connector. What did you order exactly and where from? Of course we're assuming your motors use the same connector as mine!
View ArticleRe: Stepper motor 6 pin locking female plug
I just measured the pin spacing on 2 different types of NEMA 17 stepper motor, and both are definitely 2mm pitch. I am surprised there is nobody selling stepper motor cables with connector on one end...
View ArticleRe: Stepper motor 6 pin locking female plug
I came across one company in the US but they were pretty expensive. And farnell sell pre crimped wires to go in the housing but they were very expensive. The 2mm ones were definetly too big for my...
View ArticleRe: Stepper motor 6 pin locking female plug
Quotegordonendersby I came across one company in the US but they were pretty expensive. And farnell sell pre crimped wires to go in the housing but they were very expensive. The 2mm ones were...
View ArticleRe: Stepper motor 6 pin locking female plug
QuoteKenzu I just orded these [www.aliexpress.com] That's what I'd expect to work. Cheap too, if you want 50 off that is.
View ArticleRe: Stepper motor 6 pin locking female plug
Csambrook, Heres the 2 together. The 2mm i just ordered is too big seen here next to the one on my printer. [attachment 52964 IMAG0020-1.jpg] Heres my original on a scale. [attachment 52965...
View Article