Quote
gordonendersby
I came across one company in the US but they were pretty expensive.
And farnell sell pre crimped wires to go in the housing but they were very expensive.
The 2mm ones were definetly too big for my nema 17 steppers.
Gordon
Any chance you could post the *exact* spec of these too-big ones?
If you bought from somewhere like Farnell then their product code or whatever
Also the exact markings on the packet.
Either your motors are different than mine or you bought the wrong thing or the supplier shipped the wrong thing.
I've looked up the details at work and I've inspected a raw JST-PH6 socket (that's the part which you would be plugging in to, the bit on the motor housing) and I'm pretty convinced mine really is JST-PH6. Unfortunately we don't have any PH plugs in the factory at the moment so I can't do the ultimate test and actually plug one in.
Once you do manage to sort out which series it is check the crimp spec carefully before buying ready made wires or crimps, the JST range is a nightmare of very similar looking parts which nearly interwork but don't. I'm happy to talk you through that once you can identify the range.
Oh, and your KK tooling won't work properly for JST crimps and you won't wont to cough for a JST crimp tool once you see the price.