Quantcast
Channel: Reprap Forum - Stepper Motors, Servo Motors, DC Motors
Viewing all articles
Browse latest Browse all 2228

Motors & Cable management (current rating)

$
0
0
Hello, I'm new here : I ordered a Prusa i3 clone with all the kit to assemble by hand, and i have to say i'm pretty satisfied of the prints I did until now :) .

I want to organize the cables, because it's a nightmare . I planned to use a multi contact connector ( so male + Female) to assmble all . I found one, Wepiu WS28 24 pin ( Page 47 [www.weipuconnector.com] WS28,24 pin) , but the seller is telling me the whole connector is rated @ 5Apmeres ( so 5 divided by 24 == 0,2A per pin MAX), tell me if i'm wrong ? .

I looked up my motors and found they were 2 phases and 0,6 A per phase acording to this PDF [www.datasheetspdf.com] , but I'm not sure about the Phases and the A per phases ....

The motors are not the same on the PDF, but the series are the sames : 17HD4005 . The exact reference of my motors is 17HD4005-C5.18 ( [www.youtube.com] 2:28 of this video) .

I found another information according to this PDF : that curent is not the same as the other [www.ecet.cn] on this one Current is 0.5A idk if this is per phase or not .

I know i'ts 2 phases but is that 0.4 or 0.6 A per phase or the whole motor ?


I cant find any technical documentation on what is consumed by the motor i own :(

My question is : will this WEIPU connector be able to handle all the phases by the motors ? I have another solution, such as using a DB-25 connector but i'm not able to find any datasheet for this type of connector . I mean for the rated current of the connector .

All help here would be greatly appreciated :)

Viewing all articles
Browse latest Browse all 2228

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>