do you ever hear the door latch? Posting a video would be very helpful.
The output is pretty straightforward. the door isnt latching, or isnt being read as latched.
There is a magnetic switch that detects when the door is open, so you have to make sure that your door seals extremely well.
Listen for a clicking sound coming from the upper right of the door glass, that is your door latch. You can also take off the outer curved glass covering (it is just held on by velcro), in order to see the latch.
If the latch isnt clicking, it is a bad solenoid, and you have to either get it rebuilt, or buy a new one from stratasys.
The other option is only to be used with extreme caution!!!!! I hold no liability for anything that happens as a result of this information, and do not recommend performing the following procedure.
----Dip switch #4 on the 186 board (the largest board inside of your unit) can be switched to allow operation of the unit with the door open/unlatched. DO NOT UPGRADE YOUR UNIT'S SOFTWARE WITH THIS SWITCH ENABLED, AS YOU COULD BRICK YOUR 186 BOARD!!!!!!!!
hope that helps!
The output is pretty straightforward. the door isnt latching, or isnt being read as latched.
There is a magnetic switch that detects when the door is open, so you have to make sure that your door seals extremely well.
Listen for a clicking sound coming from the upper right of the door glass, that is your door latch. You can also take off the outer curved glass covering (it is just held on by velcro), in order to see the latch.
If the latch isnt clicking, it is a bad solenoid, and you have to either get it rebuilt, or buy a new one from stratasys.
The other option is only to be used with extreme caution!!!!! I hold no liability for anything that happens as a result of this information, and do not recommend performing the following procedure.
----Dip switch #4 on the 186 board (the largest board inside of your unit) can be switched to allow operation of the unit with the door open/unlatched. DO NOT UPGRADE YOUR UNIT'S SOFTWARE WITH THIS SWITCH ENABLED, AS YOU COULD BRICK YOUR 186 BOARD!!!!!!!!
hope that helps!