Hi there
I am the owner of 4 pcs. of 42BYGHM810 ( I think ) and am looking for a driver for the motors.
I am having a little problem finding drivers for the motor, the Voltage of 1,92V and Current of 2.4A is what is bugging me :(
My plan is to have an Arduino to drive the motors:
Could any of you suggest a useable driver for me?
The specs i have can be seen below here.
Thanks a lot
Søren
Frame Size: NEMA17
Step Angle: 0.9 degree
Voltage: 1.92V
Current: 2.4 A/phase
Resistance: 0.8 Ohm/phase
Inductance: 1.8 mH/phase
Holding torque: 4200g-cm 60OZ-IN
Rotor inertia: 68 g-cm2
Detent torque: 0.22kg-cm
Number of wire leads: 4
Weight: 0.38kgs
Length: 48mm
Motor Shaft: 5mm
I am the owner of 4 pcs. of 42BYGHM810 ( I think ) and am looking for a driver for the motors.
I am having a little problem finding drivers for the motor, the Voltage of 1,92V and Current of 2.4A is what is bugging me :(
My plan is to have an Arduino to drive the motors:
Could any of you suggest a useable driver for me?
The specs i have can be seen below here.
Thanks a lot
Søren
Frame Size: NEMA17
Step Angle: 0.9 degree
Voltage: 1.92V
Current: 2.4 A/phase
Resistance: 0.8 Ohm/phase
Inductance: 1.8 mH/phase
Holding torque: 4200g-cm 60OZ-IN
Rotor inertia: 68 g-cm2
Detent torque: 0.22kg-cm
Number of wire leads: 4
Weight: 0.38kgs
Length: 48mm
Motor Shaft: 5mm