Right, I think we've settled on it being JST-PH6. I borrowed a plug to check against my printer but it's been in full use this evening so I haven't had chance to take it apart to check - sorry.
You have some choices:
RS, Farnell and DigiKey all stock the bits but it will cost you.
Alternatively there's ebay at about £4 plus a wait:
[www.ebay.co.uk]
Or Technorobots:
[www.technobotsonline.com] for the housing £0.06
[www.technobotsonline.com] for the pre-wired crimps £1.48
Plus £3 shipping
The 6 way housing is just a bare housing. The 5 way assembly is a plug, socket and wires so you'll need to remove the crimps from the housing and discard the plug and 5 way socket - it's easy to do as the plastic of the plug can be bent up without damaging the crimps at all. That will give you 5 wires with crimps already on them, you only need 4 per housing for a standard stepper arrangement so you'll have a spare. For your original desire for 5 assemblies that gets you:
5 * £1.54 + £3 shipping = under £11 all up.
Hope that helps,
Calvin
You have some choices:
RS, Farnell and DigiKey all stock the bits but it will cost you.
Alternatively there's ebay at about £4 plus a wait:
[www.ebay.co.uk]
Or Technorobots:
[www.technobotsonline.com] for the housing £0.06
[www.technobotsonline.com] for the pre-wired crimps £1.48
Plus £3 shipping
The 6 way housing is just a bare housing. The 5 way assembly is a plug, socket and wires so you'll need to remove the crimps from the housing and discard the plug and 5 way socket - it's easy to do as the plastic of the plug can be bent up without damaging the crimps at all. That will give you 5 wires with crimps already on them, you only need 4 per housing for a standard stepper arrangement so you'll have a spare. For your original desire for 5 assemblies that gets you:
5 * £1.54 + £3 shipping = under £11 all up.
Hope that helps,
Calvin