Ramps
(2B )(2A)(1A)(1B )
You need to wire as follows:
(2B = 1)(2A = 3)(1A = 4)(1B =6)
or
(2B = 3)(2A = 1)(1A = 6)(1B = 4)
I think that is correct from what you provided. The numbers following the 1A, 2A, etc are the pin numbers on the motor. Numbers on RAMPS are the coils. Steppers have no polarity so do not worry about that.
Edited to adjust for Ramps numbering/lettering, should be correct now.
(2B )(2A)(1A)(1B )
You need to wire as follows:
(2B = 1)(2A = 3)(1A = 4)(1B =6)
or
(2B = 3)(2A = 1)(1A = 6)(1B = 4)
I think that is correct from what you provided. The numbers following the 1A, 2A, etc are the pin numbers on the motor. Numbers on RAMPS are the coils. Steppers have no polarity so do not worry about that.
Edited to adjust for Ramps numbering/lettering, should be correct now.