Well I just tried disabling endstops in the firmware i'm not sure if that would have fixed the problem but I tried it and it didnt seem to make any difference. I also tried manually switching the endstops as well but no dice. I kept hitting the jog and every once in awhile it would move one step so I thought that was weird. I tried changing the voltage to see if a higher value would change anything and it aswell did not change anything it just makes noises. Is it normal for the motor to just make a constant wine while it has a current applied to it? Btb i am using ramps 1.4 and Allegro's A4988 DMOS Microstepping Driver. the motors say that they are 12-36v and up to 1.2 amps.
↧