As long as you get the coils right (1A and 2A together, etc.), then things will work, you just have to swap wires on one of the coils to get the stepper to go the right direction.
Yeah, you'll have to wrestle with the connectors, so do NOT buy a bag of 10 cables for $2! Get quality cables and save yourself the grief of dealing with marginal wire gauge for the current and bad crimps. I am big on the "two cables for $6" type of deals. With these, you can easily swap wires by using a single sharp pointy-thing to lift the plastic tab.
IMO,
DLC
Yeah, you'll have to wrestle with the connectors, so do NOT buy a bag of 10 cables for $2! Get quality cables and save yourself the grief of dealing with marginal wire gauge for the current and bad crimps. I am big on the "two cables for $6" type of deals. With these, you can easily swap wires by using a single sharp pointy-thing to lift the plastic tab.
IMO,
DLC