The usual steppers that can run directly from Pololu style drivers ( or onboard drivers ) are 2-phase motors.
Yours is 5-phase, so it would require an external driver that uses step/dir inputs for control.
It would be an improvement in terms of accuracy, but you'd have to reduce mirostepping with 8-bit controllers to be able to run it fast enough. That would make it noisy.
Better use 0.9° steppers with 2 phases ( bipolar ), they run off the shelf with all our controllers and drivers ( maybe not in 1/32 )
Yours is 5-phase, so it would require an external driver that uses step/dir inputs for control.
It would be an improvement in terms of accuracy, but you'd have to reduce mirostepping with 8-bit controllers to be able to run it fast enough. That would make it noisy.
Better use 0.9° steppers with 2 phases ( bipolar ), they run off the shelf with all our controllers and drivers ( maybe not in 1/32 )