Quote
Wurstnase
Quote
dc42
Quote
the_digital_dentist
The driver in your photo looks like one of the problematic TB6600 units. I suggest you look into it
DD, can you elaborate - what are the problems?
Quote
Wurstnase
Tb6600 needs afaik 5us high signal. So be careful that your firmware can handle this and has some config which will slow down your controller to achieve it.
Most controllers are too fast and have a high signal of maybe 1µs or less.
Thanks. The Duet and Duet WiFi do generate pulses shorter than 1us by default, but provide an option to lengthen it in the M569 command. However, extending the pulse width to 5us will limit the step rate to 100kHz on those drivers.