Hi, I suspect it's more of a programming thing.
Both grubs are tightened fully.
No skipping.
It goes forward +10, back roughly -1, forward +10
This happens in every axis. NOTE: running CoreXY so both "X" and "Y" motors run together, they also run in opposite directions for X, i.e. Clockwise and counterclockwise. Yet it still moves in the different "scales". This persists even when trying standard and not CoreXY.
This happens all the time. Haven't even been able to do my first test print on this new rig (my second printer) so not related to overheating or power consumption. This is just happening as I manually move it either from the computer, OctoPi or LCD.
Both grubs are tightened fully.
No skipping.
It goes forward +10, back roughly -1, forward +10
This happens in every axis. NOTE: running CoreXY so both "X" and "Y" motors run together, they also run in opposite directions for X, i.e. Clockwise and counterclockwise. Yet it still moves in the different "scales". This persists even when trying standard and not CoreXY.
This happens all the time. Haven't even been able to do my first test print on this new rig (my second printer) so not related to overheating or power consumption. This is just happening as I manually move it either from the computer, OctoPi or LCD.