Here some information during the HT session
Post seems to be OK but when I use an action where the door to be latched, error :
Running POST
Internal Flash CRC Test [PASS]
SDRAM Addr Test [PASS]
ISA DPM Addr Test [PASS]
Pmd DPM Data Test [PASS]
External Flash CRC Test [PASS]
NVRAM check [PASS]
Supply Voltages
5V supply: 5.12V Range: 4.85 to 5.15 [PASS]
12V supply: 12.21V Range: 11.28 to 12.72 [PASS]
15V supply: 16.22V Range: 13.50 to 16.50 [PASS]
-15V supply: -15.56V Range: -13.50 to -16.50 [PASS]
10V supply: 10.01V Range: 9.84 to 10.16 [PASS]
3.3V supply: 3.29V Range: 3.23 to 3.37 [PASS]
Navigator checksum: 0x12345678
Navigator version: 0x28400F23
Pilot checksum: 0xEC123456
Pmd DAC Tests
XSin@0.00V: 0.01V Range: -0.06 to 0.06 [PASS]
XSin@2.15V: 2.25V Range: 1.96 to 2.34 [PASS]
XSin@4.30V: 4.33V Range: 3.98 to 4.62 [PASS]
YSin@0.00V: 0.01V Range: -0.06 to 0.06 [PASS]
YSin@2.15V: 2.25V Range: 1.96 to 2.34 [PASS]
YSin@4.30V: 4.31V Range: 3.98 to 4.62 [PASS]
ZSin@0.00V: 0.01V Range: -0.06 to 0.06 [PASS]
ZSin@2.15V: 2.25V Range: 1.96 to 2.34 [PASS]
ZSin@4.30V: 4.35V Range: 3.98 to 4.62 [PASS]
Controller board EEPROM CRC Test [PASS]
Controller Configuration ID: 0
Controller part number: 202414-0001
Controller serial number: 0615-001380
Power Dist board EEPROM CRC Test [PASS]
PDB Configuration ID: 0
PDB part number: 202143-0003
PDB serial number: 0612-000761
CPLD version: 29
ColdFire version: 2 rev: 0
Mariner build: 1518.0
Cause of last reset: Power Cycle
POST successful
last act:257584 / req:227017 / malloc:443/0 / stk:3136/10992
act:241968/237552 / req:211125/206916 / malloc:444/0 / stk:2200/11012
01/01/98 00:02:02:479: DoorLatch.cpp:258:INFO:Door not latched:
mmxx 1111
01/01/98 01:50:30:642: DoorLatch.cpp:258:INFO:door not latched:
rrgg
6 (sst768)
ggee
Thu Jan 1 01:51:44 1998
ffhh
01/01/98 01:52:34:753: DoorLatch.cpp:258:INFO:door not latched:
ssss
NMIStatus: 0x0
Flags: 0x40c8 : Initialized : MhmReady : ShmReady : GlobalsLoaded
PwrControl: 0x1f : Lamp : DC : HeadHeater : ChamberHeater
Cartridge: 0xfc1 : ModPresent : ModLoaded : SupLoaded : ModLatched
: SupLatched : ModMatInHead : SupMatInHead
XYAxis: 0x0
ZAxis: 0x0
Status: 0x10 : ChamberLight
command flag = 0
curve count = 33
modHead = 192 / 0
supHead = 185 / 0
Temps = 282.60/280.00 / 254.20/250.00 / 75.00/75.00
Current Position = 0.00,0.00,0.00
Gantry: SGR13K Stage: SR144K
current material: support model fc: 0 support fc: 0
Version: 1518 PLDVersion: 29 Gender: sst768
Post seems to be OK but when I use an action where the door to be latched, error :
Running POST
Internal Flash CRC Test [PASS]
SDRAM Addr Test [PASS]
ISA DPM Addr Test [PASS]
Pmd DPM Data Test [PASS]
External Flash CRC Test [PASS]
NVRAM check [PASS]
Supply Voltages
5V supply: 5.12V Range: 4.85 to 5.15 [PASS]
12V supply: 12.21V Range: 11.28 to 12.72 [PASS]
15V supply: 16.22V Range: 13.50 to 16.50 [PASS]
-15V supply: -15.56V Range: -13.50 to -16.50 [PASS]
10V supply: 10.01V Range: 9.84 to 10.16 [PASS]
3.3V supply: 3.29V Range: 3.23 to 3.37 [PASS]
Navigator checksum: 0x12345678
Navigator version: 0x28400F23
Pilot checksum: 0xEC123456
Pmd DAC Tests
XSin@0.00V: 0.01V Range: -0.06 to 0.06 [PASS]
XSin@2.15V: 2.25V Range: 1.96 to 2.34 [PASS]
XSin@4.30V: 4.33V Range: 3.98 to 4.62 [PASS]
YSin@0.00V: 0.01V Range: -0.06 to 0.06 [PASS]
YSin@2.15V: 2.25V Range: 1.96 to 2.34 [PASS]
YSin@4.30V: 4.31V Range: 3.98 to 4.62 [PASS]
ZSin@0.00V: 0.01V Range: -0.06 to 0.06 [PASS]
ZSin@2.15V: 2.25V Range: 1.96 to 2.34 [PASS]
ZSin@4.30V: 4.35V Range: 3.98 to 4.62 [PASS]
Controller board EEPROM CRC Test [PASS]
Controller Configuration ID: 0
Controller part number: 202414-0001
Controller serial number: 0615-001380
Power Dist board EEPROM CRC Test [PASS]
PDB Configuration ID: 0
PDB part number: 202143-0003
PDB serial number: 0612-000761
CPLD version: 29
ColdFire version: 2 rev: 0
Mariner build: 1518.0
Cause of last reset: Power Cycle
POST successful
last act:257584 / req:227017 / malloc:443/0 / stk:3136/10992
act:241968/237552 / req:211125/206916 / malloc:444/0 / stk:2200/11012
01/01/98 00:02:02:479: DoorLatch.cpp:258:INFO:Door not latched:
mmxx 1111
01/01/98 01:50:30:642: DoorLatch.cpp:258:INFO:door not latched:
rrgg
6 (sst768)
ggee
Thu Jan 1 01:51:44 1998
ffhh
01/01/98 01:52:34:753: DoorLatch.cpp:258:INFO:door not latched:
ssss
NMIStatus: 0x0
Flags: 0x40c8 : Initialized : MhmReady : ShmReady : GlobalsLoaded
PwrControl: 0x1f : Lamp : DC : HeadHeater : ChamberHeater
Cartridge: 0xfc1 : ModPresent : ModLoaded : SupLoaded : ModLatched
: SupLatched : ModMatInHead : SupMatInHead
XYAxis: 0x0
ZAxis: 0x0
Status: 0x10 : ChamberLight
command flag = 0
curve count = 33
modHead = 192 / 0
supHead = 185 / 0
Temps = 282.60/280.00 / 254.20/250.00 / 75.00/75.00
Current Position = 0.00,0.00,0.00
Gantry: SGR13K Stage: SR144K
current material: support model fc: 0 support fc: 0
Version: 1518 PLDVersion: 29 Gender: sst768