Ok thanks for the info I now understand
So 2.8v 1.68a 45Ncm stepper would be fine to run on 12v
or would
2.8v 2a 59Ncm be better
Build plate will be between 300mm x 300mm to 400mm x 400mm with a build height of around 700mm
So 2.8v 1.68a 45Ncm stepper would be fine to run on 12v
or would
2.8v 2a 59Ncm be better
Build plate will be between 300mm x 300mm to 400mm x 400mm with a build height of around 700mm