... the controllers are driven from line with 230VAC -- AFAIK the 325VDC are the initial voltage peak to spped up the energitizing of the coils, then the voltage is reduced for the 1.75Amps sensing/regulating.
Only so they can achieve until 20kHz stepping frequenzies in full-step and until 200kHz when microstepping.
In my Isel are motors specified with 1 to 2 Volts, but the drivers 'charges' them with a peak voltage of 70 Volts before regulating to the set current ...
Only so they can achieve until 20kHz stepping frequenzies in full-step and until 200kHz when microstepping.
In my Isel are motors specified with 1 to 2 Volts, but the drivers 'charges' them with a peak voltage of 70 Volts before regulating to the set current ...