driver for stepper motors

I have stepper motors with the following specs:

200 steps per revolution (1.8 deg/step)
2 Phase bipolar 4 wires
Rated Voltage 2V DC
Rated Current 1.2A
Phase Resistance: 1.7 Ohm ± 10% (20º C)
Phase inductance: 4.5 mH ± 20% (1kHz 1 V rms)
Holding torque: 0.4 N.m Min. (40.0 N·cm)
Shaft diameter: 5mm / 0.188" (3/16")
Shaft length: 22mm
Motor depth: 40mm

Since they are such low voltage, which stepper motor drivers should I use? Should I go with the low voltage DRV8834?