Such a small stepper can easily be controlled by our common pololu / stepstick drivers. (A988 or DRV8825 are common )
All you'd need is an arduino nano on a breadboard, a driver,a potmeter or encoder and an endstop to manually control the height.
If you want the height to be controlled automatically by your machines controller, you'd need access to it's firmware.
-Olaf
All you'd need is an arduino nano on a breadboard, a driver,a potmeter or encoder and an endstop to manually control the height.
If you want the height to be controlled automatically by your machines controller, you'd need access to it's firmware.
-Olaf